3 drilling cycles, 3 dr illing cy cles – HEIDENHAIN TNC 410 User Manual

Page 137

8 Programming: Cycles

124

8.3 Drilling Cycles

The TNC offers 8 cycles for all types of drilling operations:

Cycle

Soft Key

1 PECKING
Without automatic pre-positioning

200 DRILLING
With automatic pre-positioning and
2nd set-up clearance

201 REAMING
With automatic pre-positioning and
2nd set-up clearance

202 BORING
With automatic pre-positioning and
2nd set-up clearance

203 UNIVERSAL DRILLING
With automatic pre-positioning, 2nd set-up
clearance, chip breaking, and decrement

204 BACK BORING
With automatic pre-positioning,
2nd set-up clearance

2 TAPPING
With a floating tap holder

17 RIGID TAPPING
Without a floating tap holder

8.3 Dr

illing Cy

cles