HEIDENHAIN TNC 410 - Manual (Page 45)

32 4 Programming: Fundamentals of NC, File Management, Programming Aids
Select a file
Call the file manager.
<
Use the arrow keys to move the highlight to the desired file:
Move the highlight up or down
Enter the first or more letters of the file you wish to select and then
press the GOTO key: The highlight moves to the first file that
matches these letters.
<
The selected file is opened in the operating
mode from which you have the called file
manager: Press ENT.
Copy a file
ú Move the highlight to the file you wish to copy.
ú Press the COPY soft key to select the copying
function.
ú Enter the name of the destination file and confirm your entry with
the ENT key: The TNC copies the file. The original file is retained.
Rename a file
ú Move the highlight to the file you wish to rename.
ú Select the renaming function.
ú Enter the new file name; the file type cannot be
changed.
ú To execute renaming, press the ENT key.
4.2 File Management
Delete a file
ú Move the highlight to the file you want to delete.
ú To select the erasing function, press
the DELETE soft key.
The TNC inquires whether you really
intend to erase the file.
ú To confirm erasure press the YES soft
key.
Abort with the NO soft key if you do
not wish to erase the file.
Protecting a file/Canceling file
protection
ú Move the highlight to the file you want to protect.
ú To enable file protection, press the
PROTECT/UNPROTECT soft key.
The file now has status P.
To cancel file protection, proceed in the same way
using the PROTECT/UNPROTECT soft key. You also
need to enter the code number 86357.
Converting an FK program into
HEIDENHAIN conversational format
ú Move the highlight to the file you want to convert.
ú To select the converting function,
press the CONVERT FK->H soft key
(2nd soft-key row).
ú Enter the name of the destination file.
ú To execute conversion, press the ENT
key.