HEIDENHAIN TNC 410 - Manual (Page 284)

271 HEIDENHAIN TNC 410
14.5 Mac
hine-Specific User P
a
ramet
ers
Starting TNCremo under Windows
Windows 3.1, 3.11, NT:
ú Doubleclick on the icon in the program group HEIDENHAIN
Applications
Windows95:
ú Click on , , ,
When you start TNCremo for the first time, you will be asked for the
type of control you have connected, the interface (COM1 or COM2)
and the data transfer speed. Enter the necessary information.
Data transfer between the TNC 410 and TNCremo
Ensure that:
■ The TNC 410 is connected to the correct serial interface of your
computer
■ The data transfer speed set on the TNC is the same as that set on
TNCremo
Once you have started TNCremo, you will see a list of all of the files
that are stored in the active directory on the left of the window
Using the menu items , , you can change the
active directory or select another directory. To start data transfer
from the TNC (see „4.2 File Management“), select ,
. TNCremo is now ready to receive data.
End TNCremo
Select the menu items , , or press the key
combination ALT+X
Refer also to the TNCremo help texts where all of the
functions are explained in more detail.
14.5 Machine-Specific User Parameters
The machine tool builder can assign functions to up to 16
user parameters. Refer to your machine manual.