HEIDENHAIN TNC 410 - Manual (Page 231)

10 Programming: Q Parameters 218
FN19: PLC
Transferring values to the PLC
The function FN19: PLC transfers up to two numerical values or Q
parameter contents to the PLC.
Resolution and units: 1 µm and 0.001° or
0,1 µm and 0.0001°
The resolution depends on the machine parameter 4020
(default setting is 1 µm and 0.001°).
Example: Numerical value 10 (meaning 10 µm or 0,01°) is sent to the
PLC.
56 FN19:PLC=+10/+Q3
1
0.7 A
dditional F
unctions