HEIDENHAIN TNC 410 - Manual (Page 298)

285 HEIDENHAIN TNC 410
15.1 Gener
al User P
a
ra
met
ers
Display step for the X axis
MP7290.0
0.1 mm or 0.1°: 0
0.05 mm or 0.05°: 1
0.01 mm or 0.01°: 2
0,005 mm or 0.005°: 3
0.001 mm or 0.001°: 4
Display step for the Y axis
MP7290.1
0.1 mm or 0.1°: 0
0.05 mm or 0.05°: 1
0.01 mm or 0.01°: 2
0.005 mm or 0.005°: 3
0.001 mm or 0.001°: 4
Display step for the Z axis
MP7290.2
0.1 mm or 0.1°: 0
0.05 mm or 0.05°: 1
0.01 mm or 0.01°: 2
0.005 mm or 0.005°: 3
0.001 mm or 0.001°: 4
Display step for the IVth axis
MP7290.3
0.1 mm or 0.1°: 0
0.05 mm or 0.05°: 1
0.01 mm or 0.01°: 2
0.005 mm or 0.005°: 3
0.001 mm or 0.001°: 4
Disable datum setting
MP7295
Do not disable datum setting: +0
Disable datum setting in the X axis: +1
Disable datum setting in the Y axis: +2
Disable datum setting in the Z axis: +4
Disable datum setting in the IV axis: +8
Disable datum setting in the V axis: +16
Disable datum setting in the 6th axis: +32
Disable datum setting in the 7th axis: +64
Disable datum setting in the 8th axis: +128
Disable datum setting in the 9th axis: +256 Lock axis: +8
Disable datum setting with the orange axis keys
MP7296
Do not inhibit datum setting: 0
Disable datum setting with the orange axis keys: 1