HEIDENHAIN TNC 410 - Manual (Page 15)

2 1 Introduction
1.1 The TNC 410
HEIDENHAIN TNC controls are shop-floor programmable
contouring controls for milling, drilling and boring machines, as well
as machining centers with up to four axes. You can program
conventional milling, drilling and boring operations right at the
machine with the easily understandable interactive conversational
guidance. You can also change the angular position of the spindle
under program control.
Keyboard and screen layout are clearly arranged in a such way that
the functions are fast and easy to use.
Programming: HEIDENHAIN conversational and ISO formats
HEIDENHAIN conversational programming is an especially easy
method of writing programs. Interactive graphics illustrate the
individual machining steps for programming the contour. If a
production drawing is not dimensioned for NC, the HEIDENHAIN
FK free contour programming carries out the necessary calculations
automatically. Workpiece machining can be graphically simulated
during test run. It is also possible to program in ISO format or DNC
mode.
You can enter a program while the TNC is running another.
Compatibility
The TNC can execute all part programs that were written on
HEIDENHAIN controls TNC 150 B and later.
1
.1
The
TNC 41
0