Contents tnc models, software and features – HEIDENHAIN TNC 410 User Manual
Page 4
I
HEIDENHAIN TNC 410
Contents
TNC Models, Software and
Features
This manual describes functions and features provided by
the TNCs with the following NC software number.
TNC Model
NC Software No.
TNC 410
286 060-xx
TNC 410
286 080-xx
The machine tool builder adapts the useable features of the
TNC to his machine by setting machine parameters. There-
fore, some of the functions described in this manual may
not be among the features provided by your machine tool.
TNC functions that may not be available on your machine
include:
■
Probing function for the 3-D touch probe
■
Digitizing option
■
Tool measurement with the TT 120
■
Rigid tapping
Please contact your machine tool builder to become familiar
with the individual implementation of the control on your
machine.
Many machine manufacturers, as well as HEIDENHAIN,
offer programming courses for the TNCs. We recommend
these courses as an effective way of improving your
programming skill and sharing information and ideas with
other TNC users.
Location of use
The TNC complies with the limits for a Class A device in
accordance with the specifications in EN 55022, and is
intended for use primarily in industrially-zoned areas.