Grass Valley Xplay Vertigo Suite v.5.0 - Manual (Page 109)

5-18 Xplay User Manual
Controlling Xplay devices using automation protocols
N OTE
TCP Layer Mapping
The Xplay.ini or XplayPro.ini files contain a setting called Layer Mapping, which can
be used with the Oxtel protocol. This setting is used to map Oxtel layers to device keyers.
Since the Oxtel protocol commands controlling an Imagestore can only specify layer 0 and 1,
it may be necessary to map the Oxtel layers to the keyers actually used on the device.
For TCP layer mapping, the O XTEL TCPL AYER M APPING variable shown below is required in
the D EVICE section of the first configured oxtel layer for a device:
[Device1]
...
OxtelTCPPort=5006
OxtelTCPAdvancedLogging=True
OxtelTCPLayerMapping=0,1|1,2
Each pair of numbers separated by a “|” character is a layer mapping. The first number is the
Oxtel layer number while the second number is the corresponding device keyer number.