Visara LINCS Features User Manual
Page 102
92
LINCS Features
707021-001
The following topics detail capabilities which are available in WSC mode:
• Defining a Profile - You can define up to 3 User Profiles. Remember that Profile 0 is the
default profile and is always defined. To define a profile, simply press the profile number
(1, 2, or 3) of the profile you wish to define.
If your device is a Mod 3, 4, or 5 device, you may press the Enter key to toggle to the desired
Mod Size. The new Mod size will be displayed on the status line as shown in the WSC
Status Line example . Note that you can change the Profile Mod size only if no windows are
defined for the profile.
• Creating a Window - Once a profile has been created, you can create up to five windows in
the profile. To add a window to a user-profile, press a session letter (a-j) to correspond to the
session you wish to add. The window will be added to the current profile and data from the
indicated session will be copied into the window.
Once one or more windows have been added to a profile, the windows can be sized and
moved within the profile as desired.
• Sizing a Window - You can change the size of any window in a user-profile. To enter “size”
mode, press the
session (a-j) and use the cursor move keys described below to size the window as desired.
• Cursor Up - controls the top border.
• Cursor Down - controls the bottom border.
• Cursor Left - controls the left border.
• Cursor Right - controls the right border.
The cursor movement keys are used to “enlarge” the window by moving the indicated
border in the indicated direction. If the Alt key is held down while the cursor movement key
is pressed, then the window size will be reduced by moving the border in the opposite
direction.
Once all windows are sized as desired, you can exit SIZE mode by pressing the
Exit SETUP mode by pressing the
• Moving a Window - You may need to move windows within a profile to obtain the desired
window arrangement. To enter “move” mode, press the
To move a window, select the desired session (a-j) and use the cursor move keys described
below to move the window as desired.
• Cursor Up - moves the window up.
• Cursor Down - moves the window down.
• Cursor Left - moves the window to the left.
• Cursor Right - moves the window to the right.
Once all windows are moved as desired, you can exit MOVE mode by pressing the
key. Exit SETUP mode by pressing the
• Deleting a Window - You can delete a window from a user-profile by pressing the
key followed by the
window in the will become the foreground window. To remove a user-profile, you can
delete all windows which are in the profile.
• Saving Profiles - You can save your user-defined profiles at any time by entering WSC
mode and pressing the