Orion System VCC-X Controller - Manual (Page 93)

VCC-X Operator Interface SD
INDEX
93
S-V
Space Sensor Overrides Screen.........21
Space Sensor Slide Adjust.........41
Space Sensor Type.........27
Space Temperature.........26
Confi guration.........26
Space Temperature & Slide Adjust.........56
Space Temperature Status.........56
Space Temperature with
High OA CFM........26
Stage Off Window - Cooling/Heating.........46
Staging Up and Down Delay Periods.........36
Stand-Alone Connection.........9
Start and Stop Times
2359.........14,22
ZERO.........14,22
Static / Fan Control Rate Screen.........28
Static Pressure Control Rate Max Adjust
Screen.........28,31
Static Pressure Control Screen.........28
Static Pressure Deadband.........43
Static Pressure Setpoint.........43
Status Key.........10,16
Status Screen Index for RSM.........67
Steam Heat.........29
Superheat 1.........68
Superheat 2.........68
Superheat Setpoint.........51
Supply Air.........26
Temperature.........76
Supply Air Airfl ow Monitoring.........33
Supply Air CFM.........59
Supply Air Cooling Setpoint and High Reset
Limit.........44
Supply Air Cutoffs - Cooling/Heating.........49
Supply Airfl ow Duct Size.........33
Supply Air Heating Setpoint and High Reset
Limit.........45
Supply Air Temperature Sensor.........52
Supply Air Temperature & Setpoint.........56
Supply Air Temperature Status.........56
Supply Air with Supply Air
Tempering.........26
Supply Fan
Building Pressure Control.........31
Supply Fan VFD.........49
Supply VFD Override.........81
System
Status.........80
Type.........79
System Manager
Dimensions.........6
Override Search.........21
Passcodes.........19
System Manager TS.........10,16
SZ VAV Integral Constant.........50
T
Testing the System
Outputs Force.........81
Time
24-Hour Military Format.........14,22
Time & Date.........11,17
Title 24 Economizer %.........59
Title 24 Economizer Actuator
Feedback.........26
Title 24 Economizer Confi guration.........30
Touch Screen System Manager.........10,16
Trend Log Rate.........35
Troubleshooting the System
Outputs Force.........81
U
Unit Selection Screen.........69,79
Unoccupied
Mode.........15,23
Setbacks.........72
Unsafe Suction Pressure Alarm.........68
V
VAV/Zone
AHU Heat Call Space
Temperature.........73
Box Heat Allow.........70
Confi guration.........69
Controllers.........69,78
COOLING ONLY BOX.........69
Damper Airfl ow
Cool/Heat Minimum.........73
Integral.........73
Maximum.........73
Vent Minimum.........73
Damper Airfl ow Fixed Position.........74
Damper Airfl ow Night
Minimum.........74
Damper Airfl ow Reheat
Minimum.........74
Day/Night Schedule.........75
Dump Zone.........71
Expansion Relays Heating
Stages.........70
H/C CHANGEOVER BOX.........69
Main Fan Status.........70
Maximum EMS Offset.........75
Maximum Slide Offset.........75
Occupied Setpoints.........72
PARALLEL FAN BOX.........69
Pressure Independent Airfl ow
Constant.........70
Proportional Heating Signal.........70
Push-Button Override.........71
Push-Button Override Duration.........75
Sensor Calibration for Space
Temperature.........75
Sensor Calibration for Supply Air
Temperature.........75
SERIES FAN BOX.........69
Unoccupied Setbacks.........72
Voting Zone.........70
Zone Alarm Delay.........75
Zone Alarm Offsets.........74
VAV/Zone Confi guration
Damper Operation.........69
VAV/Zone Setpoints
AHU Heat Call Space
Temperature.........73
Damper Airfl ow
Cool Minimum.........73
Heat Minimum.........73
Integral.........73
Maximum.........73
Vent Minimum.........73
Damper Airfl ow Fixed Position.........74
Damper Airfl ow Night
Minimum.........74
Damper Airfl ow Reheat
Minimum.........74
Day/Night Schedule.........75
Fan On Min.........74
Maximum EMS Offset.........75
Maximum Slide Offset.........75
Occupied Setpoints.........72
Push-Button Override Duration.........75
Sensor Calibration for Space
Temperature.........75
Sensor Calibration for Supply Air
Temperature.........75
Unoccupied Setbacks.........72
Zone Alarm Delay.........75
Zone Alarm Offsets.........74
VAV/Zone Status
Airfl ow.........77
Alarm Status.........77
Box Air Temperature.........76
Cooling Setpoints.........76
Desired CFM.........77
Fan Status.........77
Heating/Cooling Demand.........76
Heating Setpoints.........76
Mode of Operation.........76
Reheat Stages.........77
Screens.........76
Slide Offset.........76
Supply Air Temperature.........76
Zone Damper Position.........77
Zone Temperature.........76