Orion System VCC-X Controller - Manual (Page 92)

INDEX
VCC-X Operator Interface SD 92
S
SCREENS, CONTINUED
Outdoor Sensor Type.........27
Outputs Force Screen.........81
Overrides Screen.........13,21
Preheat Relay Setpoint.........50
PREHEAT-X Vent Mode
Setpoint.........51
Purge Mode Delay.........29
Reheat Type.........32
Relay Confi guration Screens.........37
Relay Overrides.........81
Reset Rate Interval.........27
Return Air Airfl ow Monitoring.........33
Return Air Bypass Control.........36
Return Air Bypass Damper Factor
Setpoint.........51
Return Airfl ow Duct Size.........34
Return Air Temperature Sensor
Calibration.........52
Return Sensor Type.........28
SAT Reset Source.........27
SAT Sensor Calibration - Current and
Offset.........52
Schedule Number.........34
Schedule Override.........15,23
Set Time & Date Screens.........11,17
Space Sensor Calibration - Current and
Offset.........52
Space Sensor Overrides Screen.........21
Space Sensor Push-Button Override
Duration.........42
Space Sensor Slide Adjust.........41
Space Sensor Slide Adjust
Setpoint.........41
Space Sensor Type.........27
Stage Off Window - Cooling/
Heating.........46
Static / Fan Control Rate.........28
Static Pressure Control.........28
Static Pressure Control Rate Max
Adjust.........28
Static Pressure Setpoint.........43
Superheat Setpoint.........51
Supply Air Airfl ow Monitoring.........33
Supply Air Cooling Setpoint and High
Reset Limit.........44
Supply Air Cutoffs - Cooling/
Heating.........49
Supply Airfl ow Duct Size.........33
Supply Air Heating Setpoint and High
Reset Limit.........45
Supply VFD Override.........81
SZ VAV Integral Constant.........50
Title 24 Economizer.........30
Trend Log Rate.........35
Unit Selection Screens.........69,79
Unoccupied Offsets - Cooling &
Heating.........41
Unoccupied Offsets - Heat/
Cool.........41
VAV/Zone Box Confi guration.........69
VAV/Zone Confi guration.........69
VAV/Zone Controller Setpoints.........72
VAV/Zone Damper Operation.........69
VAV/Zone Status.........76
VCC-X Confi guration Screens.........25
VFD Speed Limits Min/Cool/
Vent.........44
VFD Speed Limits Min/Max
Heat.........44
VFD Speed Minimums Cool/Vent
Modes.........44
Warmup SAT Setpoint.........51
Week Schedules.........14,22
Search
For Loops.........20
For Overrides.........21
Selection Buttons Defi ned.........10,16
Sensor Calibration
Space Temperature.........75
Supply Air Temperature.........75
Sensor Scaling Screen.........25
SERIES FAN BOX VAV/Zone.........69
Setpoints.........39
Building Pressure.........48
Button.........10,16
CO
2
Altitude Setpoint.........48
CO
2
Sensor Calibration........53
CO
2
Setpoints Min/Max.........48
Coil Temperature Setpoint.........43
Controlling Sensor High Alarm
Offset.........42
Controlling Sensor Low Alarm
Offset.........42
Cool Reset Source Setpoints.........44
Defrost Heat Wheel.........50
Economizer Enable Setpoint.........47
Economizer Maximum Position
if High CO
2
Level.........48
Economizer Maximum Position in
High CO
2
Level.........48
Economizer Minimum Damper
Position.........47
Head Pressure Setpoints.........47
Head Pressure Setpoints - Cooling and
Reheat.........47
Heat Reset Source.........45
Heat Wheel Defrost Temperature
Setpoint.........50
High Alarm Offset.........42
High Reset Limit.........45
Hood On HVAC Setpoints -
OAT Cool, OAT Heat.........40
Indoor RH Setpoint.........43
Low Alarm Offset.........42
Low Ambient Setpoint.........50
Maximum Economizer Position in
Heat Mode.........47
Minimum Outdoor Airfl ow.........47
Mod Cool Proportional Window &
Time Period.........46
Mode Deadband.........41
Mod Heat Output Position in Off
Mode.........49
Mod Heat Proportional Window &
Time Period.........46
Morning Warm Up Max Length &
Target Temp.........50
OAT Lockouts - Comp Cool/Comp
Heat.........49
OAT Lockouts - Heat.........49
OAT Sensor Calibration.........52
Occupied HVAC Cool/Heat
Setpoints.........40
Outdoor Dewpoint Setpoint.........42
Preheat Relay Setpoint.........50
Return Air Bypass Damper
Factor.........51
Return Air Temperature Sensor
Calibration.........52
SAT Sensor Calibration.........52
SAT Sensor Calibration - Current &
Offset.........52
Screens.........40
Space Sensor Calibration - Current &
Offset.........52
Space Sensor Push-Button Override
Duration.........42
Space Sensor Slide Adjust.........41
Stage Off Window - Cooling/
Heating.........46
Static Pressure.........43
Static Pressure Setpoint.........43
Superheat.........51
Supply Air Cooling Setpoint and High
Reset Limit.........44
Supply Air Cutoffs.........49
Supply Air Cutoffs - Cooling/
Heating.........49
Supply Air Heating.........45
SZ VAV Integral Constant.........50
Unoccupied Offsets - Cooling &
Heating.........41
Unoccupied Offsets Heat/Cool.........41
VFD Speed Limits Min/Cool/
Vent.........44
VFD Speed Limits Min/Max
Heat.........44
VFD Speed Minimums Cool/Vent
Modes.........44
Warmup SAT Setpoint.........51
Setting
Date.........11,17
Day of Week.........11,17
Month.........11,17
Year.........11,17
Single Zone VAV.........26
Slide Adjust Status.........56
Slide Offset
VAV/Zone Status.........76
Space Relative Humidity Percentage.........57
Space RH.........57
Space Sensor Calibration .........52