Troubleshooting, Vcc-x outputs force, Vcc-x operator interface sd 82 – Orion System VCC-X Controller User Manual
Page 82
Zone
Zone
TROUBLESHOOTING
VCC-X Operator Interface SD
82
Analog Output 4 Screen
Exhaust Fan Signal
Override Volts: -1.0
[-1.0 = Auto]
The default setting for normal operation is -1.0 volts. Voltages
between 0 to 10.0 are valid entries. Press
after making
a setting change and then press
<
>
and the next Analog Output
Override Screen
will be displayed.
Analog Output 5 Screen
Modulating Cool
Override %...: -10%
[-10 = Auto]
The default setting for normal operation is -10%. Percentages
between 0 to 100 are valid entries. Press
after making
a setting change and then press
<
>
and the next Analog Output
Override Screen
will be displayed.
VCC-X Outputs Force
Analog Output 6 Screen
Mod Condenser
Override Volts: -1.0
[-1.0 = Auto]
The default setting for normal operation is -1.0 volts. Voltages
between 0 to 10.0 are valid entries. Press
after making
a setting change.
- VCB-X Controller VCB-X VCB-X Modular Service Tool VCM Controller Operator Interfaces SD VCM-X/RNE Controller VCC-X Modular System Manager SD Modular System Manager SD Quick Start VCM-X/RNE Controller Operator Interface SD SA E-BUS Controller VAV II Controller v.1 CAV II Controller v.1 MUA II Controller v.1 VAV II Controller v.2 CAV II Controller v.2 MUA II Controller v.2