Orion System VCC-X Controller - Manual (Page 2)

Zone
Zone
SD CARD UPDATING INSTRUCTIONS
The Modular Service Tool and Modular System Manager are equipped with
an SD memory card. This SD card can be removed and easily updated
through a computer by downloading updates, as they become available,
from our website to your computer.
In order to perform any updates, your computer needs an SD card drive or
you will need to purchase an SD card adapter.
Download instructions are found in Appendix B on page 85 of this manual.
WattMaster Controls, Inc.
8500 NW River Park Drive · Parkville, MO 64152
Toll Free Phone: 866-918-1100
PH: (816) 505-1100 · FAX: (816) 505-1101
E-mail: [email protected]
Visit our website at www.orioncontrols.com AAON ® is a registered trademark of AAON, Inc., Tulsa, OK.
WattMaster Controls, Inc. assumes no responsibility for
errors or omissions.
This document is subject to change without notice.
Form: OR-VCCXOISD-TGD-01A
Copyright June 2015 WattMaster Controls, Inc.
www.orioncontrols.com
IMPORTANT NOTICE
This technical guide provides instructions for using the Modular Service
Tool and Modular System Manager SD with the VCC-X & VAV/Zone
Controllers only. If you are using a different controller, you can download
the applicable SD Technical Guide listed below from our website—
orioncontrols.com. The technical guides can also be printed from the SD
card.
VCB-X Controller - OR-VCBXIOSD-TGD
VCM-X & VCM-X E-BUS Controller - OR-VCMXRNEOISD-TGD
RNE Controller - OR-VCMXRNEOISD-TGD
SA E-BUS Controller - AA-SAOISD-TGD
VCM Controller - OR-VCMOISD-TGD
VAV/CAV and MUA II Controllers - OR-VAVCAVMUAOISD-TGD