Vcc-x status, Vcc-x status screens, Vcc-x operator interface sd 62 – Orion System VCC-X Controller User Manual
Page 62

Zone
Zone
VCC-X STATUS
VCC-X Operator Interface SD
62
Status Screens #37-#41 - EM1 Relays
VCC-X v1.02 ID #
Main Exp Rly 1-5
Relay Name
ON/OFF
Line 2 On Board Relays 1-5 Status
Line 3 Current description of what this Relay is
confi gured for
On screens 37-41, this line will indicate the relay’s use.
Possible options are:
Not Used (Default)
Cool
Stage
Heat
Stage
Mod
Heat
Enable
Mod Cool Enable
Warmup
/
Cooldown
ReHeat
PreHeat
Low
Ambient
Exhaust
Fan
Economizer
Heat
Wheel
Occupied
Mode
Override
Mode
Alarm
Active
Line 4 Current Relay Status
This line will display the ON/OFF condition for that
relay. FORCED ON or FORCED OFF will appear if
this Relay is in a Force Mode. Possible options are as
follows:
ON OFF
FORCED
ON
FORCED
OFF
Status Screens #42-#53 - 12 Relay Expansion
Module Relays
VCC-X v1.02 ID #
12 Rly Bd Rly 1-12
Relay Name
ON/OFF
Line 2 On Board Relays 1-12 Status
Line 3 Current description of what this Relay is
confi gured for
On screens 42-53, this line will indicate the relay’s use.
Possible options are:
Not Used (Default)
Cool
Stage
Heat
Stage
Mod
Heat
Enable
Mod Cool Enable
Warmup
/
Cooldown
ReHeat
PreHeat
Low
Ambient
Exhaust
Fan
Economizer
Heat
Wheel
Occupied
Mode
Override
Mode
Alarm
Active
Line 4 Current Relay Status
This line will display the ON/OFF condition for that
relay. FORCED ON or FORCED OFF will appear if this
Relay is in a Force Mode. Possible options are as
follows:
ON OFF
FORCED
ON
FORCED
OFF
VCC-X Status Screens
- VCB-X Controller VCB-X VCB-X Modular Service Tool VCM Controller Operator Interfaces SD VCM-X/RNE Controller VCC-X Modular System Manager SD Modular System Manager SD Quick Start VCM-X/RNE Controller Operator Interface SD SA E-BUS Controller VAV II Controller v.1 CAV II Controller v.1 MUA II Controller v.1 VAV II Controller v.2 CAV II Controller v.2 MUA II Controller v.2