Daktronics All Sport 5000 Series Operation Manual - Manual (Page 92)

74 Basketball Operations
Display Action
MM:SS = minutes, seconds
Enter the correct amount of time per period in minutes and
seconds on the number pad and press .
For example, 20:00 per half or 8:00 per quarter
Note: Pressing to select the period time as the
main clock setting will increment the current period
number if the clock value was previously zero.
MM:SS = minutes, seconds
Set the amount of time between periods.
Enter the correct amount of time for break length in minutes
and seconds on the number pad and press .
For example, 1:00
MM:SS = minutes, seconds
Set the amount of time for the overtime periods.
Enter the correct amount of time for overtime periods in
minutes and seconds on the number pad and press
.
For example, 5:00
Shot Clock
Display Action
N = current setting
This setting allows a shot clock to display tenths of a second
(NBA shot clocks only).
Press to set ON or press to set OFF.
If YES is selected, a prompt will ask to enter a value for when
to show the tenths. The tenths digit and a period will display
when the shot time is below the set value. Enter a value of
<0> to <9> and press (use “0” for 10 seconds).
MAI N CLOCK-TI ME
PERI OD MM:SS*
MAI N CLOCK-TI ME
BREAK MM:SS*
MAI N CLOCK-TI ME
OVERTI ME MM:SS*
SHOT CLOCK-MODE
TENTH SECOND? N
SHOW TENTHS
AT: N