Daktronics All Sport 5000 Series Operation Manual - Manual (Page 136)

118 Hockey/Lacrosse/Handball Operations
Setting Result
N = current setting
In count down mode, the switch closes when the main clock
reaches zero and remains closed until a nonzero value is
entered.
In count up mode, the switch closes when the main clock
reaches the proper period, break, or overtime length and
opens when any other value is entered.
N = current setting
The switch closes when the main clock is stopped and opens
when the main clock is running. External devices are disabled
when the main clock is running.
N = current setting
The switch closes when the main horn sounds. This could be
when Auto Horn is enabled and the main clock reaches zero
or when is pressed.
Default Settings
Print this page if necessary, and record any custom settings for this installation:
Setting Default Custom 1 Custom 2 Custom 3
Tenth of a Second Yes
No. of Periods 3
Period Length 15:00
Break Length 10:00
Overtime Length 5:00
Shot Reset 1 0:45
Shot Reset 2 0:30
Sync Shot with Main Yes
Auto Blank Shot Clock Yes
Minor Penalty 2:00
Major Penalty 5:00
Full Time Outs 1
Full Time Out 1:00
Time Out Warning 0:00
Partial Time Outs 0
Partial Time Out 0:00
Show on Main No
Select Captions 1-ON
Switch Output 1-Clock = 0
SWI TCH OUTPUT=N
1-CLOCK =0?
SWI TCH OUTPUT=N
2-CLOCK =STOP?
SWI TCH OUTPUT=N
3-MAI N HORN?