Daktronics All Sport 5000 Series Operation Manual - Manual (Page 275)

Water Polo Operations 257
Shot Clock Horn
Display Action
The LCD will show if the shot clock horn is set for Combined
or Independent.
If Combined, press to set the shot clock horn to sound
separately without the main horn.
If Independent, press to set the shot clock horn to
sound the main horn at the same time.
Press to leave the setting as it is.
Switch Output
The All Sport ® 5000 console has a switch that can be used to run a number of different
devices. The switch can be configured to operate under different settings. The default setting
is 1-CLOCK= 0.
To display the desired switch setting:
1. Press the number (0, 1, 2, 3) key as a shortcut or use the left and right arrow keys to
scroll to the desired setting.
2. Press to select the new setting.
3. Press or the down arrow key to leave the switch setting and display the next
prompt.
The possible settings for the switch output are as follows:
Setting Result
N = current setting
The switch remains open at all times and any external devices
are disabled.
N = current setting
In count down mode, the switch closes when the main clock
reaches zero and remains closed until a nonzero value is
entered.
In count up mode, the switch closes when the main clock
reaches the proper period, break, or overtime length and
opens when any other value is entered.
HORN-COMBI NED
SET I ND? Y/N
HORN-I NDEPENDENT
SET COMB? Y/N
SWI TCH OUTPUT=N
0-DI SABLED?
SWI TCH OUTPUT=N
1-CLOCK =0?