Daktronics All Sport 5000 Series Operation Manual - Manual (Page 113)

Football Operations 95
Display Action
Press <1> or <2> to display the game clock (default) or the
time of day clock on the scoreboard.
Press the down arrow key to exit the Menu and return to the
game.
If 2-TOD is selected this message will be displayed.
Press to blank all game data on the scoreboard
except for the Time of Day digits.
8.4 Settings
The user can edit the following settings by selecting EDIT SETTINGS from the Main Menu.
Main Clock
Note 1: The settings for the Main Clock are used with the key.
Note 2: The period, break, and overtime lengths are used differently depending on the
direction of the main clock. For count down, the main clock is set to the selected length,
decrements towards zero, and stops at zero. For count up, the main clock is set to zero,
increments towards the selected length, and stops when the selected length is reached.
Display Action
When the main clock is set to count down and tenths of a
second is selected, the main clock displays in tenths of a
second remaining when the time is below one minute.
Press to set the main clock to display tenths of a
second.
Press to display whole seconds.
MM:SS = minutes, seconds
Enter the correct amount of time per period in minutes and
seconds on the number pad and press .
For example, 12:00 per quarter.
Note: Pressing to select the period time as the
main clock setting will increment the current period
number if the clock value was previously zero.
MENU-TI ME OF DAY
1*GAME 2-TOD
MENU-TI ME OF DAY
BLANK GAME DATA?
MAI N CLOCK-MODE
TENTH SECOND? Y
MAI N CLOCK-TI ME
PERI OD MM:SS*