Daktronics All Sport 5000 Series Operation Manual - Manual (Page 274)

256 Water Polo Operations
Penalty Time
Default times can be set for the penalty keys.
Display Action
MM:SS = minutes, seconds
Enter the correct default time for a penalty in minutes and
seconds on the number pad and press the key.
For example, 0:20.
The penalty time is used as the default when pressing the
player penalty start function.
Time Outs
Note 1: If a full or partial time out is not needed for the HOME or GUEST
keys, enter zero for the number of time outs.
Note 2: If a full or partial time out is not needed for , enter zero
for the time.
Note 3: The number for each type of time out must be manually entered for an overtime
period using the key sequence for each team.
Display Action
N = current setting
Enter the number of full time outs on the number pad and
press .
MM:SS = minutes, seconds
Enter the amount of time for a full time out in minutes and
seconds on the number pad and press .
For example, 1:00
Press to display the time out time on the LCD and the
main clock digits of the scoreboard while the time out clock is
active.
Press to display the time out time on the LCD only.
PENALTY TI ME
SET MM:SS*
TI ME OUTS- MODE
FULL N *
TI ME OUTS- TI ME
FULL MM:SS*
TI ME OUTS-MODE
SHOW ON MAI N? N