Daktronics All Sport 5000 Series Operation Manual - Manual (Page 71)

Clock Console Operations 53
Section 6: Clock Console Operations
Sport Insert: 0G-136301
The Sport Insert drawing is located in Appendix B. The Quick Reference is located in Appendix D.
Reference Drawings:
Insert, Clock Console .......................................................................................... Drawing A-136301
Refer to the information in Section 2 to start up the console and use the sport insert.
If an insert is lost or damaged, a copy of the insert drawing can be used until a replacement arrives.
Use the label sheet provided with the console (Daktronics part # LL-2458) to attach the correct code
number label to the sport insert in the designated location. Write the code number in the space below.
If viewing a digital copy of this manual, print this page and fill in the code number.
Write the correct code number here:
If the code number for a scoreboard is unknown, refer to Appendix C. If the model number of a
scoreboard is unknown, refer to the documentation provided with the scoreboard.
6.1 Clock Console Codes
The clock console is used to keep clock and timer information for basketball and football
codes. The code numbers are listed below.
CODE:
1000 - Basketball Main Clock and Shot Clock
6000 - Football Main Clock and Shot Clock
6.2 Clock Console Keys
Timer Start
starts the Shot Clock or Play Clock timer.
Note: In Basketball Mode, the main clock must be running in order to start the shot clock,
unless the Sync to Main setting is disabled (see Section 7.4).
Timer Stop
stops the Shot Clock or Play Clock timer.