Daktronics All Sport 5000 Series Operation Manual - Manual (Page 262)

244 Water Polo Operations
Enable Penalty Clocks
Press to allow the penalty clocks to count when the main
clock is on. The LCD will display “EN” in the lower-right corner.
Disable Penalty Clocks
Press to disable the penalty clocks from counting when the
main clock is on. The LCD will display “DS” in the lower-right corner.
Shot Time
Display Action
MM:SS = minutes, seconds
Press > to display the current shot clock time
length.
To accept the current shot clock time length press .
To decline the selection of the current shot clock time length
press .
Use the keypad to enter the new time in minutes and seconds
and press .
Press twice to clear changes and return to the
game.
MM:SS = minutes, seconds
Press > a second time to display the
configured time for shot clock Reset 1 length.
To accept the shot clock Reset 1 length press .
To decline the selection of the shot clock Reset 1 length,
press .
Use the keypad to enter the new time in minutes and seconds
and press .
Press twice to clear changes and return to the
game.
Note: The configured time of shot clock is set using the
EDIT SETTINGS function when a new code is selected.
SHOT CLOCK-EDI T
CURR MM:SS*
SHOT CLOCK-EDI T
RESET 1 MM:SS*