Penalty/tol – Daktronics All Sport 5000 Series Operation Manual User Manual
Page 148

130
Soccer Operations
Display
Action
N = current setting
Enter the number of full time outs on the number pad and
press
MM:SS = minutes, seconds
Enter the amount of time for a full time out in minutes and
seconds on the number pad and press
For example, 1:00
MM:SS = minutes, seconds
A warning horn can be configured to signal the end of a full
time out. While the time out clock is counting down, the horn
will sound for one second when the warning time is reached.
Enter a zero for the time to disable the warning horn.
Enter the time in minutes and seconds on the number pad
and press
N = current setting
Enter the number of partial time outs on the number pad and
press
MM:SS = minutes, seconds
Enter the amount of time for a partial time out in minutes and
seconds on the number pad and press
For example, 00:20
Press
main clock digits of the scoreboard while the time out clock is
active.
Press
Penalty/TOL
Display
Action
This selection allows the operator to decide whether or not to
display the penalty or TOL on the penalty digits. Use the right
or left arrow keys or any number key to change the selection,
and then press
TI ME OUTS- MODE
FULL N *
TI ME OUTS- TI ME
FULL MM:SS*
TI ME OUTS- MODE
WARNI NG MM:SS*
TI ME OUTS- MODE
PARTI AL N *
TI ME OUTS- TI ME
PARTI AL MM:SS*
TI ME OUTS-MODE
SHOW ON MAI N? N
DI SPLAY MODE
PENALTY* TOL