Daktronics All Sport 5000 Series Operation Manual - Manual (Page 124)

106 Hockey/Lacrosse/Handball Operations
Display Action
Press twice to clear changes and return to the
game.
Note: The configured time of shot clock is set using the
EDIT SETTINGS function when a new code is selected.
MM:SS = minutes, seconds
Press a third time to display the
configured time for shot clock Reset 2 length.
To accept the shot clock Reset 2 length press .
To decline the selection of the shot clock Reset 2 length press
.
To change the shot clock Reset 2 length and set the shot
clock enter the new time in minutes and seconds on the
number pad and press .
Press twice to clear changes and return to the
game.
Note: The configured time of shot clock is set using the
EDIT SETTINGS function when a new code is selected.
Auto Horn Interval Timer
The Auto Horn Interval Timer function can be used to automatically sound the horn at
regular intervals, for instance, to indicate player substitutions.
Display Action
Press > followed by <1> to ensure the auto
horn is enabled. With the auto horn disabled, it will not be
possible to enable the interval timer.
M = minutes
Press <1> again to enable the interval timer.
Enter a number <1> through <5> to set the time in minutes
that the horn will sound.
When the interval timer is active, a lowercase “i” will appear
on the main LCD display next to the clock direction arrow.
SHOT CLOCK-EDI T
RESET 2 MM:SS*
AUTO HORN- ON
1-ON, 2-OFF
HORN-I NTERVAL
1-ON, 2-OFF OFF
HORN-I NTERVAL
TI ME =M