Daktronics All Sport 5000 Series Operation Manual - Manual (Page 209)

Event Counter 191
Increment Value
Display Action
NNNN = current value
Press •> to set the increment value.
The increment value will be added to the total value after each
time interval.
Decrement Value
Display Action
NNNN = current value
Press T VALUE •> to set the decrement value.
The decrement value will be subtracted from the total value
each time interval if the increment value is 0.
Time Interval
Display Action
HH:MM.SS = hours, minutes,
seconds
Press to set the interval time between
each increment or decrement.
Note: The clock must be stopped to set the time interval.
When is pressed to start the main clock, the controller counts down the time
interval to 00:00:00 and adjusts the initial value by the increment or decrement value. The
interval time resets and the cycle will repeat until is pressed.
15.4 External Input Counting Codes
The External Input Counter counts the occurrences of external switch inputs starting at the
initial value.
Display Action
NNNNNNN = current value
The current value is shown on the top line of the LCD.
I NCREMENT VALUE
NNNN*
DECREMENT VALUE
NNNN*
I NTERVAL
HH:MM:SS*
VALUE = NNNNNNNN
EXT I NPUT MODE