Daktronics All Sport 5000 Series Operation Manual - Manual (Page 49)

Baseball Operations 31
Ball Count, Strike Count, Clear Count
The and keys increment the Ball and Strike
digits. Pressing the key sets the both counts to zero.
When the Auto Pitch Increment setting is on, the and
keys automatically increment the ball and strike pitch count data of
the team that is not at bat (AT BAT indicator off).
If the Ball Count value is 4 when is pressed the value is blanked out.
Press a second time to set the value to zero.
If the Strike Count value is 3 when is pressed the value is blanked
out. Press a second time to set the value to zero.
Ball and strike pitch count data is not incremented when the and
values are incremented to blank or zero.
Hit, Error, Fielder’s Choice, Clear Hit/Error
The and > keys are used to turn on the Hit or Error indicator or digits.
The key is used to indicate the batter reached due to fielder’s choice
(an “F” will display in the hit/error digit). On some scoreboards, the > key can
also display the player’s position when the Error Position setting is on. Pressing the HIT/ERROR> key turns off the Hit and Error indicators and clears the digits (including
fielder’s choice). > is used as an example.
Display Action
Press the > key to turn on the Error indicator or
digits.
Press the > key again to turn off the Error indicator
or digits.
NN = current setting
When the > key is pressed, enter the position
number of the player and press .
This prompt only appears when the Error Position in Edit
Settings is on (see Section 4.4).
Press the key to turn off the Hit and
Error indicators and clear the digits. This also clears the
fielder’s choice.
ERROR: ON
ERROR: OFF
ERROR:
POSI TI ON NN
HI T: OFF
ERROR: OFF