Daktronics All Sport 5000 Series Operation Manual - Manual (Page 205)

Wrestling Operations 187
Weight Class
Display Action
This setting allows the use of weight classes. Press to
use weight classes, or press to select not to use weight
classes.
Display Lines for Weight Class
Display Action
N = number of lines
This setting represents the number of lines used on the stat
panel displays. It can only be set to 5 or 6.
Press the <5> or <6> key and then .
Display Team Score
Display Action
This menu option allows for selection of having the Team
Score display on the Matside advantage/team score module.
If set to display it will show team score after the match is reset
until an advantage time is started.
Press to select display ON.
Press to select display OFF.
Switch Output
The All Sport ® 5000 console has a switch that can be used to run a number of different
devices. The switch can be configured to operate under different settings. The default setting
is 1-CLOCK= 0.
To display the desired switch setting:
1. Press the number (0, 1, 2, 3) key as a shortcut or use the left and right arrow keys to
scroll to the desired setting.
2. Press to select the new setting.
3. Press or the down arrow key to leave the switch setting and display the next
prompt.
The possible settings for the switch output are as follows:
WEI GHT CLASS
ON Y/N? -OFF
# OF DI SP LI NES
N
DI SPLAY NO
TEAM SCORE Y/N?