CIRCUTOR CVM-B Series User Manual
Page 91
Use the keys
and
to browse the various parameters.
If there is an alarm associated with the variable being displayed, the following will be shown:
The module with which the alarm is associated.
The associated output in the module.
The alarm status:
not activated,
pre-alarm activated,
alarm activated.
The
icon flashes during the delay time in the alarm connection (ON) and
disconnection (OFF).
The menu in the lower area disappears after a few seconds.
Press the
key to display the lower area again.
The following icons also appear in the lower area:
Back, returns to the default parameters display screen,
figure 65�
Main Menu, back to the main menu,
figure 25
.
If you press the key
while selecting a display parameter, you will enter the parameter
display menu.
5�1�3�1�3�1�- Demand parameters display menu�
For each demand parameter, this menu enables (
figure 75
):
figure 75: Demand parameters, display menu (display 4 parameters)�
Graphic view.(
Tariff selection
(“5.1.3.1.3.1.2. Tariff selection.”)
91
Instruction Manual
CVM-B100 - CVM-B150