CIRCUTOR CVM-B Series - Manual (Page 265)

7�5�4�3�- Configuration of the RS-485 gateway parameters
The configuration parameters of the RS-485 gateway are, figure 185 :
 The transmission speed, Baud rate.
 The parity.
 The number of stop bits.
figure 185: Configuration screen of the Modbus TCP (Bridge) module (RS-485 Gateway)
● When programming the transmission speed, Baud rate:
, ... Possible transmission speeds : 9600, 19200, 38400, 57600, 76800 or
115200�
Previous, selects the previous parameter �
Next, selects the next parameter �
Confirm, confirms and saves the values programmed on the screen in the
memory �
Back, returns to the main configuration screen of the Modbus TCP module,
figure 182�
Main Menu, returns to the main menu, figure 25 .
Use the and buttons to select the different options.
To confirm the selection, press the button.
If no button is pressed for 5 minutes, the display screen changes automatically to the default
screen, which displays the voltage measurement of 4 parameters.
265 Instruction Manual
CVM-B100 - CVM-B150