CIRCUTOR CVM-B Series User Manual
Page 149
Confirm, confirms and saves in the memory the values programmed on the screen
�
Back, returns to the home screen of the setup menu
Main Menu, back to the main menu,
figure 25
.
Use the keys
and
to select the different options.
To confirm the selection, press the key
.
If no key is pressed for 5 minutes, the display screen changes automatically to the default
screen, which displays the voltage measurement of 4 parameters.
● When programming the
maximum value above which the relay is activated:
The units and maximum and minimum values of the variables to program are shown in
Table 22
.
NB: The maximum value must be greater than the minimum value programmed.
,
...
,
,
The ten possible digits to program
�
Delete character, deletes the selected character
�
Delete parameter, deletes the characters of the selected parameter.
Previous, selects the previous parameter
�
Next, selects the next parameter
�
Confirm, confirms and saves in the memory the values programmed on the screen
�
Back, returns to the home screen of the setup menu
Main Menu, back to the main menu,
figure 25
.
Use the keys
and
to select the different options.
To confirm the selection, press the key
.
If no key is pressed for 5 minutes, the display screen changes automatically to the default
screen, which displays the voltage measurement of 4 parameters.
Table 22: Units and maximum and minimum values of the programming variables of the digital outputs�
Variable
Units
Maximum
Minimum
Phase-Neutral Voltage
V
1000.00 * voltage ratio
(1)
0
Phase-Phase Voltage
V
Neutral Voltage
V
Current
A
10.000 *current ratio
(2)
0
Neutral Current
A
Frequency
Hz
70.00
40.00
149
Instruction Manual
CVM-B100 - CVM-B150