beautypg.com

CIRCUTOR CVM-B Series User Manual

Page 155

background image

● When programming the

minimum value below which the transistor is activated:

The units and maximum and minimum values of the variables to program are shown in

Table

22

.

,

...

The ten possible digits to program

,

Comma and minus sign.

Delete character, deletes the selected character

Delete parameter, deletes the characters of the selected parameter.

Previous, selects the previous parameter

Next, selects the next parameter

Confirm, confirms and saves in the memory the values programmed on the screen

Back, returns to the home screen of the setup menu

figure 113

.

Main Menu, back to the main menu,

figure 25

.

Use the keys

and

to select the different options.

To confirm the selection, press the key

.

If no key is pressed for 5 minutes, the display screen changes automatically to the default

screen, which displays the voltage measurement of 4 parameters.

● When programming the

maximum value above which the transistor is activated:

The units and maximum and minimum values of the variables to program are shown in

Table 22

.

NB: The maximum value must be greater than the minimum value programmed.

,

...

The ten possible digits to program

,

Comma and minus sign.

Delete character, deletes the selected character

Delete parameter, deletes the characters of the selected parameter.

Previous, selects the previous parameter

Next, selects the next parameter

Confirm, confirms and saves in the memory the values programmed on the screen

Back, returns to the home screen of the setup menu

figure 113

.

Main Menu, back to the main menu,

figure 25

.

Use the keys

and

to select the different options.

To confirm the selection, press the key

.

155

Instruction Manual

CVM-B100 - CVM-B150