CIRCUTOR CVM-B Series - Manual (Page 171)

If no key is pressed for 5 minutes, the display screen changes automatically to the default
screen, which displays the voltage measurement of 4 parameters.
● When programming the MAC:
Here you have to program the MAC address.
, ... The ten possible digits to program �
Previous, selects the previous parameter �
Next, selects the next parameter �
Confirm, confirms and saves in the memory the values programmed on the screen �
Delete character, deletes the selected character �
Delete parameter, deletes the characters of the selected parameter.
Back, returns to the main configuration screen for integrated communications.
Main Menu, back to the main menu, figure 25 .
Use the keys and to select the different options.
To confirm the selection, press the key .
Maximum value: 127.
Minimum value: 0.
If no key is pressed for 5 minutes, the display screen changes automatically to the default
screen, which displays the voltage measurement of 4 parameters.
● When programming the Device ID:
, ... The ten possible digits to program �
Previous, selects the previous parameter �
Next, selects the next parameter �
Confirm, confirms and saves in the memory the values programmed on the
screen �
Delete character, deletes the selected character �
Delete parameter, deletes the characters of the selected parameter.
Back, returns to the main configuration screen for integrated communications.
Main Menu, back to the main menu, figure 25 .
Use the keys and to select the different options.
To confirm the selection, press the key .
Maximum value: 4194303.
Minimum value: 0.
171 Instruction Manual
CVM-B100 - CVM-B150