CIRCUTOR CVM-B Series - Manual (Page 172)

If no key is pressed for 5 minutes, the display screen changes automatically to the default
screen, which displays the voltage measurement of 4 parameters.
5�6�19�- Parameter reset�
The parameters to be reset are selected on the parameter reset screen, figure 139 .
In the CVM-B you can reset:
 The maximum and minimum values.
 The energies.
 The demand values.
 The maximum demand maximum values.
 The energy closes.
 The event and energy logs.
figure 139: Parameter reset screen�
The following options appear in the lower area:
Enable reset, enable reset of selected parameter.
Disable reset, disable reset of selected parameter.
Previous, selects the previous parameter �
Next, selects the next parameter �
Confirm, confirms and saves in the memory the values programmed on the screen �
Back, returns to the home screen of the setup menu figure 113 .
Main Menu, back to the main menu, figure 25 .
Use the keys and to select the different options.
To confirm the selection, press the key .
172
CVM-B100 - CVM-B150
Instruction Manual