CIRCUTOR CVM-B Series - Manual (Page 252)

If no key is pressed for 5 minutes, the display screen changes automatically to the default
screen, which displays the voltage measurement of 4 parameters.
When selecting the output to configure, figure 176, the configuration parameters are:
 Variable code.
 The scale.
 The zero
 The full scale.
figure 176: Analogue outputs configuration screen.
The parameter selected is indicated in white.
The following options appear in the lower area:
● When programming the variable code which controls the analogue output ( Table 21 ):
, ... the ten possible digits to program �
Delete character, deletes the selected character �
Delete parameter, deletes the characters of the selected parameter.
Previous, selects the previous parameter �
Next, selects the next parameter �
Confirm, confirms and saves in the memory the values programmed on the screen �
Back, returns to the main configuration screen for analogue outputs, figure 175�
Main Menu, back to the main menu, figure 25 .
252
CVM-B100 - CVM-B150
Instruction Manual