CIRCUTOR CVM-B Series User Manual

Page 299

Displayed here are all the expansion modules connected to the unit.

If in the unit there is more than one module of the same type connected, a number will appear
in the icon to differentiate them

; the module with the lowest number has the lowest serial

number.
Use the

and

buttons to move to the different options and select the

Datalogger

module icon

Press the button

to open the main configuration screen of the Datalogger module,

figure 208: Main configuration screen of the Datalogger module.

The following options appear in the lower area:

Configuration of the TCP parameters.(

Port configuration (

Back, returns to the home screen of the expansion modules menu,

Main Menu, returns to the main menu,

figure 25

Use the

and

buttons to select the different options.

To confirm the selection, press the

button.

If no button is pressed for 5 minutes, the display screen changes automatically to the default

screen, which displays the voltage measurement of 4 parameters.

299

Instruction Manual

CVM-B100 - CVM-B150