CIRCUTOR CVM-B Series - Manual (Page 133)

5�6�7�- Ratio of current transformers�
The current transformer ratio is selected on this screen, figure 120 .
The following is programmed:
 The value of the primary current
 The value of the secondary current.
 The value of the primary neutral current.
 The value of the secondary neutral current.
figure 120: Current transformer ratio configuration screen.
The parameter selected is indicated in white.
The following options appear in the lower area:
● When programming the Primary current and the Primary neutral current:
, ... The ten possible digits to program.
● When programming the Secondary current:
To select a 1A secondary.
To select a 5A secondary.
To select an efficient MC type transformer (/0.250 A)
● When programming the secondary neutral current:
To select a 1A secondary.
To select a 5A secondary.
133 Instruction Manual
CVM-B100 - CVM-B150