CIRCUTOR CVM-B Series - Manual (Page 138)

● When programming the number of quadrants:
Consumption, installation that works with 2 quadrants.
Consumption and generation, installation that works with 4 quadrants.
● For all parameters:
Previous, selects the previous parameter �
Next, selects the next parameter �
Confirm, confirms and saves in the memory the values programmed on the
screen �
Back, returns to the home screen of the setup menu figure 113 .
Main Menu, back to the main menu, figure 25 .
Use the keys and to select the different options.
To confirm the selection, press the key .
If no key is pressed for 5 minutes, the display screen changes automatically to the default
screen, which displays the voltage measurement of 4 parameters.
5�6�11�- energy consumption costs�
The energy consumption costs are selected on this screen figure 124 :
 The cost per kWh of electricity of tariff 1 consumption.
 The cost per kWh of electricity of tariff 2 consumption.
 The cost per kWh of electricity of tariff 3 consumption.
 The currency.
figure 124: Energy consumption costs configuration screen.
138
CVM-B100 - CVM-B150
Instruction Manual