CIRCUTOR CVM-B Series - Manual (Page 134)

Calculated current, to select a software-based calculation by the unit of the neutral
current.
● For all parameters:
Previous, selects the previous parameter �
Next, selects the next parameter �
Confirm, confirms and saves in the memory the value programmed on the screen �
Delete character, deletes the selected character �
Delete parameter, deletes the characters of the selected parameter.
Back, returns to the home screen of the setup menu figure 113 .
Main Menu, back to the main menu, figure 25 .
Use the keys and to select the different options.
To confirm the selection, press the key .
If no key is pressed for 5 minutes, the display screen changes automatically to the default
screen, which displays the voltage measurement of 4 parameters.
Primary current:
For /5A and /1A secondary current: Maximum value: 10000.
For MC type secondary current: Maximum value: 1500.
Minimum value: 1.
Primary neutral current:
Maximum value: 10000.
Minimum value: 1.
The primary voltage x primary current value must be less than 60MW.
134
CVM-B100 - CVM-B150
Instruction Manual