CIRCUTOR CVM-B Series - Manual (Page 249)

figure 174: Analogue inputs configuration screen.
The parameter selected is indicated in white.
The following options appear in the lower area:
● When programming the scale:
0... 20 mA, to select the scale from 0 to 20 mA �
4... 20 mA, to select the scale from 4 to 20 mA �
Previous, selects the previous parameter �
Next, selects the next parameter �
Confirm, confirms and saves in the memory the values programmed on the screen �
Back, returns to the main configuration screen for analogue inputs, figure 173�
Main Menu, back to the main menu, figure 25 .
● When programming the Zero and the full-scale value:
Zero is the value for which you have the start of the analogue input, 0 or 4 mA.
The full-scale is the value for which you have the end of the analogue input, 20 mA.
, ... the ten possible digits to program �
Negative, the minus sign �
Delete character, deletes the selected character �
Delete parameter, deletes the characters of the selected parameter.
Previous, selects the previous parameter �
Next, selects the next parameter �
249 Instruction Manual
CVM-B100 - CVM-B150