CIRCUTOR CVM-B Series User Manual
Page 218
7�2�3�1�1�-
Configuration of a digital input, impulse mode.
When selecting the configuration of digital inputs in impulse mode, you can program the
following parameters:
The input name.
The units.
The decimals.
The energy meter factor.
The configuration of a digital input in impulse mode in the expansion modules is the same as
the configuration of the digital inputs in impulse mode integrated in the unit, see
Configuration of digital inputs, impulse mode.”
7�2�3�1�2�-
Configuration of a digital input, logic state mode.
When selecting the configuration of digital inputs in logic state mode, you can program the input
logic as positive or negative.
The configuration of a digital input in logic state mode in the expansion modules is the same as
the configuration of the digital inputs in logic state mode integrated in the unit, see
Configuration of digital inputs, logic state mode.”
7�2�3�2�-
Relay digital outputs�
Select the output to configure on the main configuration screen of the relay digital outputs,
.
figure 157: Main configuration screen of relay digital outputs.
The following options appear in the lower area:
218
CVM-B100 - CVM-B150
Instruction Manual