CIRCUTOR CVM-B Series - Manual (Page 129)

5�6�4�- Access key�
The access key to the unit setup menu is selected on this screen figure 117 .
figure 117: Access key configuration screen.
The digit selected is indicated in white.
The following options appear in the lower area:
, ... The ten possible digits to program.
Previous, selects the previous digit �
Next, selects the next digit �
Confirm, confirms and saves in the memory the value programmed on the screen �
Back, returns to the home screen of the setup menu figure 113 .
Unlock, removes setup menu protection by means of a password.
Main Menu, back to the main menu, figure 25 .
Use the keys and to select the different options.
To confirm the selection, press the key .
If the unit is protected with a password and you want to remove that protection, select the
unlock option
and an information screen will appear indicating that you are about to unlock
the unit, and then finally select the confirmation option .
If no key is pressed for 5 minutes, the display screen changes automatically to the default
screen, which displays the voltage measurement of 4 parameters.
129 Instruction Manual
CVM-B100 - CVM-B150