CIRCUTOR CVM-B Series - Manual (Page 62)

Press the key to display the lower area again.
The menu at the bottom displays all the available demand parameters ( Table 13 ).
Table 13: Demand parameters that can be selected on the customisation screens�
Customisation screen
Icon Demand parameter
Current
Active power
Apparent power
To select a parameter, press the button to open the menu at the bottom for selecting the
phase:
Phase L1, Phase L2, Phase L3, Three-phase.
The tariff must be selected after selecting the phase:
Tariff 1, Tariff 2, Tariff 3.
Finally, the option appears for saving the selection.
The following options are also shown on the bottom at all times
Back, returns to the previous customisation screen.
Main Menu, back to the main menu, figure 25 .
Use the keys and to browse the different options.
To access the option selected press the key .
62
CVM-B100 - CVM-B150
Instruction Manual