CIRCUTOR CVM-B Series - Manual (Page 159)

● When programming the variable code which controls the transistor digital output ( Table 21 ):
, ... The ten possible digits to program �
Delete character, deletes the selected character �
Delete parameter, deletes the characters of the selected parameter.
Previous, selects the previous parameter �
Next, selects the next parameter �
Confirm, confirms and saves in the memory the values programmed on the screen
Back, returns to the home screen of the setup menu figura 113 .
Main Menu, back to the main menu, figure 25 .
Use the keys and to select the different options.
To confirm the selection, press the key .
To cancel the operation of a digital output, the 00 code must be programmed.
If no key is pressed for 5 minutes, the display screen changes automatically to the default
screen, which displays the voltage measurement of 4 parameters.
● When programming the energy meter factor:
The factor of the energy meter is the amount of energy per hour needed for generating a pulse,
in Wh.
, ... The ten possible digits to program �
Delete character, deletes the selected character �
Delete parameter, deletes the characters of the selected parameter.
Previous, selects the previous parameter �
Next, selects the next parameter �
Confirm, confirms and saves in the memory the values programmed on the screen �
Back, returns to the home screen of the setup menu figura 113 .
Main Menu, back to the main menu, figure 25 .
Use the keys and to select the different options.
To confirm the selection, press the key .
If no key is pressed for 5 minutes, the display screen changes automatically to the default
screen, which displays the voltage measurement of 4 parameters.
159 Instruction Manual
CVM-B100 - CVM-B150