CIRCUTOR CVM-B Series - Manual (Page 131)

5�6�6�- Ratio of voltage transformers�
The voltage transformer ratio is selected on this screen, figure 119 .
The following is programmed:
 The value of the primary voltage
 The value of the secondary voltage.
 The value of the rated phase-neutral voltage.
figure 119: Voltage transformer ratio configuration screen.
The parameter selected is indicated in white.
The following options appear in the lower area:
, ... The ten possible digits to program.
Comma , when programming the secondary voltage.
Previous, selects the previous parameter �
Next, selects the next parameter �
Confirm, confirms and saves in the memory the value programmed on the screen �
Delete character, deletes the selected character �
Delete parameter, deletes the characters of the selected parameter.
Back, returns to the home screen of the setup menu figure 113 .
Main Menu, back to the main menu, figure 25 .
Use the keys and to select the different options.
To confirm the selection, press the key .
131 Instruction Manual
CVM-B100 - CVM-B150