CIRCUTOR CVM-B Series - Manual (Page 251)

Next, selects the next parameter �
Confirm, confirms and saves in the memory the values programmed on the screen �
Back, returns to the main configuration screen for analogue inputs, figure 173�
Main Menu, back to the main menu, figure 25 .
Use the keys and to select the different options.
To confirm the selection, press the key .
If no key is pressed for 5 minutes, the display screen changes automatically to the default
screen, which displays the voltage measurement of 4 parameters.
7�4�3�2�- Analogue outputs�
Select the output to configure on the main configuration screen for the analogue outputs,
figure 175 .
figure 175: Main configuration screen for analogue outputs.
The following options appear in the lower area:
... Analogue outputs, 1 to 8, to select the configuration of each of the 8 ana-
logue outputs.
Back, returns to the main configuration screen for analogue inputs/outputs,
figure 172 .
Main Menu, back to the main menu, figure 25 .
Use the keys and to select the different options.
To confirm the selection, press the key .
251 Instruction Manual
CVM-B100 - CVM-B150