CIRCUTOR CVM-B Series - Manual (Page 247)

Displayed here are all the expansion modules connected to the unit.
If in the unit there is more than one module of the same type connected, a number will appear
in the icon to differentiate them
; the module with the lowest number has the lowest serial
number.
Use the and buttons to move to the different options and select the analogue Inputs/
Outputs icon .
Press the button to open the main configuration screen of the module of analogue digital
inputs/outputs, figure 172�
figure 172: Main configuration screen for analogue inputs/outputs.
The following options appear in the lower area:
Analogue inputs (1) , to select the configuration of analogue inputs.
Analogue outputs (1) , to select the configuration of analogue outputs.
Back, returns to the home screen of the expansion modules menu, figure 171 .
Main Menu, back to the main menu, figure 25 .
(1) If in the unit there is more than one module of the same type connected, a number will
appear in the icon to differentiate them; the module with the lowest number has the lowest
serial number.
Use the keys and to select the different options.
To confirm the selection, press the key .
If no key is pressed for 5 minutes, the display screen changes automatically to the default
screen, which displays the voltage measurement of 4 parameters.
247 Instruction Manual
CVM-B100 - CVM-B150