CIRCUTOR CVM-B Series - Manual (Page 60)

5�1�1�2�1�1�2�- Selecting an incremental parameter�
figure 48 shows the screen for selecting an incremental parameter.
figure 48: Custom parameters screen, selecting an incremental parameter (displays 1 parameter)�
The menu in the lower area disappears after 3 seconds.
Press the
key to display the lower area again.
The menu at the bottom displays all the available instantaneous parameters ( Table 12 ).
Table 12: Incremental parameters that can be selected on the customisation screens�
Customisation screen
Icon Incremental parameter Icon Incremental parameter
Active energy Apparent energy
Inductive reactive energy Active tariff hours
Capacitive reactive energy CO
2
Emissions
Total reactive energy Cost
To select a parameter, press the button to open the menu at the bottom for selecting the
phase:
● For the Active energy, Inductive reactive energy, Capacitive reactive energy, Total
reactive energy and Apparent energy parameters:
Phase L1, Phase L2, Phase L3, Three-phase.
60
CVM-B100 - CVM-B150
Instruction Manual