CIRCUTOR CVM-B Series - Manual (Page 283)

Displayed here are all the expansion modules connected to the unit.
If in the unit there is more than one module of the same type connected, a number will appear
in the icon to differentiate them
; the module with the lowest number has the lowest serial
number.
Use the
and buttons to move to the different options and select the Profibus
communications icon .
Press the button to open the main configuration screen of the Profibus communications
module, figure 197�
figure 197: Main configuration screen of the Profibus module
The identifier of the unit in the Profibus network can be selected in this screen.
The following options appear in the lower area:
, ... the ten possible digits to program �
Delete character, deletes the selected character �
Delete parameter, deletes the characters of the selected parameter.
Confirm, confirms and saves the values programmed on the screen in the memory �
Back, returns to the home screen of the expansion modules menu, figure 196 .
Main Menu, returns to the main menu, figure 25 .
Use the and buttons to select the different options.
To confirm the selection, press the button.
If no button is pressed for 5 minutes, the display screen changes automatically to the default
screen, which displays the voltage measurement of 4 parameters.
283 Instruction Manual
CVM-B100 - CVM-B150