CIRCUTOR CVM-B Series User Manual
Page 217
7�2�3�1�-
Digital inputs�
The operating mode for 8 digital inputs and the parameters for each mode are selected in the
main configuration screen for digital inputs,
.
The 8 inputs can be configured separately as:
Impulses.
Logic state.
The order for configuring an input is:
1�- Select the operating mode: impulses or logic state.
2�- Select the digital input and configure the appropriate parameters.
figure 156: Main configuration screen for relay digital inputs.
The following options appear in the lower area:
Impulses, to select the input as impulses.
Logic state, to select the input as a logic state.
...
Digital input, 1 to 8, to select the configuration of each of the 8 digital inputs.
Confirm, confirms and saves in the memory the values programmed on the screen
�
Back, returns to the main screen for relay digital inputs/outputs,
Main Menu, back to the main menu,
figure 25
.
Use the keys
and
to select the different options.
To confirm the selection, press the key
.
If no key is pressed for 5 minutes, the display screen changes automatically to the default
screen, which displays the voltage measurement of 4 parameters.
217
Instruction Manual
CVM-B100 - CVM-B150