CIRCUTOR CVM-B Series User Manual
Page 50
5�1�1�1�3�-
Demand parameters�
On this screen,
figure 39
, you can view all the maximum demand parameters indicated in
Tabla 10
.
For each of the demand parameters you can view:
Graphical representation of the parameter.
The analogue representation of the parameter.
The value for each tariff, T1, T2 and T3.
A bar chart with the indications of the instantaneous value, maximum and minimum
values and alarms, see
figure 39: Demand parameters (display 1 parameter)�
Table 10:Demand parameters (displays 1 parameter)�
Icon
Display 1 parameter
Demand parameters�
Current
Active power
Apparent power
The following icons appear for all these parameters on the screen:
Indicating that the parameter refers to consumed or
generated energy.
If the 2 icons light up at the same time, it means the installation is not properly connect-
ed.
Use the keys
and
to browse the various parameters.
If there is an alarm associated with the variable being displayed, the following will be shown:
The module with which the alarm is associated.
50
CVM-B100 - CVM-B150
Instruction Manual