CIRCUTOR CVM-B Series - Manual (Page 22)

3.5.- STARTING UP THE UNIT
Once the CVM-B is connected to the power supply, the following screen, figure 11 , appears on
the display and checks the integrity of the unit and detects the expansion modules.
figure 11: Initial check screen of the CVM-B�
When the checking process has finished, the welcome screen is displayed ( figure 12 ) until the
key is pressed to continue with the start-up.
NB: If 20 seconds elapse without pressing the key, the unit moves directly to the measure-
ment screen by default.
figure 12: CVM-B welcome screen�
22
CVM-B100 - CVM-B150
Instruction Manual